top of page
  • avptest94

The Ultimate Guide to New Closet Installation: 12 Steps That Every DIYer Needs to Know

Are you in the process of a home remodel? What better way to put your stamp on a room than with a brand-new closet installation?

This project may look intimidating and complicated, but it doesn’t have to be. With some basic tools and materials, you can easily tackle this task and enjoy your handiwork. In this guide, we'll walk you through each step of closet installation so that you can get the job done quickly and correctly.

Let's get started!

Step 1: Planning Your Project

If you're planning a new closet installation, the first step is to take stock of your needs and wants. What are you looking to store in your new closet? Clothes? Shoes? Seasonal items? Linens? Once you know what you need to store, you can start planning the layout of your new closet.

Think about how you want your new closet to function. Do you want it to be a walk-in closet? A reach-in closet? Would built-in drawers or shelves be helpful? How much hanging space do you need? Answering these questions will help you determine the size and layout of your new closet.

Step 2: Preparing the Area

If you're installing a new closet, the first thing you need to do is prepare the area. This means making sure the area is clean and free of any debris or obstacles.

You'll also want to measure the space so you know how much closet-organizing material you'll need. Once you've done all that, you're ready to start installing your new closet!

Step 3: Measuring Your Space

To start, grab a tape measure and make note of the following dimensions:

  • The width of the wall where your closet will be installed

  • The height of the ceiling in your closet space

  • The depth of your closet (from front to back)

Once you have these measurements, you can begin planning the layout of your new closet. Keep in mind that most standard closets are at least 24 inches deep, so if your space is shallower than that, you may need to adjust your plans accordingly.

When measuring your space, be sure to account for any doors or windows that may be in the way. You’ll also want to leave enough clearance around the perimeter of your closet so that you can easily access all of your belongings. A good rule of thumb is to leave at least 2 feet of open space around the perimeter of your closet.

Step 4: Choose Your Closet System

When it comes time to choose your closet system, there are many things to consider. The first is what type of system you want: do you want a pre-fabricated system or a custom-built one? Pre-fabricated systems come in a variety of styles and can be easily installed, but they may not fit your space as well as a custom system. Custom systems are more expensive and require more work to install, but they will be tailored to your specific needs.

The next thing to consider is what materials you want your system to be made from. The most popular materials are wood and metal, but there are also plastic and laminate options available. Each material has its own benefits and drawbacks, so it’s important to do some research before making a decision.

Once you’ve decided on the type and material of your system, it’s time to start shopping around!

Step 5: Purchase Your Materials

This includes everything from the shelving and hanging rods to the screws and nails. Depending on the size and complexity of your project, the cost of materials can range from a few hundred dollars to a few thousand.

To get the best deals on materials, it is important to shop around and compare prices at different stores. Home improvement stores like Lowe’s and Home Depot usually have the best prices on basic items like lumber and hardware. For more specialized items, it may be necessary to visit a local retailer or order online.

Once you have gathered all of your materials, it is time to start installing your new closet!

Step 6: Assemble Your Closet System

Begin by attaching the vertical supports to the wall using screws or nails. Then, attach the horizontal shelves and rods to the supports, making sure that they are level and even. Once everything is attached, you can start hanging your clothes and organizing your new space!

Step 7: Installing the Closet Rods

When installing closet rods, it's important to use a level. This will ensure that your clothes hang evenly and don't get bunched up on one side. To install the rods, simply screw the brackets into the wall at the desired height.

Then, slide the rod into the bracket and tighten it down. Make sure the rod is firmly in place and doesn't wiggle around.

To support the rod at both ends, you'll need to install end caps. These can be found at most hardware stores and come in a variety of styles. Simply screw them into place at both ends of the rod to provide support and prevent sagging over time.

Step 8: Install shelves, racks, and other storage solutions in your closet

If you’re working with basic shelving, this is a relatively easy process—simply screw the shelves into place using the appropriate hardware.

If you’re installing something more complex, like a custom closet system, it’s best to leave this task to the professionals.

In either case, be sure to take proper measurements and level everything before putting anything into place. You don’t want your new closet storage to be crooked or unstable.

Step 9: Install Your Closet Doors

Assuming you've already hung your closet door tracks, it's now time to install your closet doors. If you're using hinged doors, start by attaching the hinges to the door. Then, position the door in the opening and use a drill to screw the hinges into the track. Repeat this process for each door.

If you're using sliding doors, start by attaching the hardware to the top of the door. Then, place the door on the track and use a drill to screw the hardware into the track. Repeat this process for each door.

Once all of your doors are installed, open and close them to make sure they're working properly.

Step 10: Finishing Touches

Assuming your closet installation went off without a hitch, it's time for the finishing touches! Here are a few things to do to ensure your new closet is everything you hoped for:

  • Hang hooks or racks for any items that won't be stored in drawers or on shelves. This might include coats, hats, purses, or belts.

  • Add a mirror if you didn't already install one. A full-length mirror is ideal, but a smaller one will do the trick if that's all you have room for.

  • Install any lighting you plan on using inside the closet. This could be as simple as an overhead light fixture or some battery-operated LED lights.

  • lace a rug or mat just outside the closet to help catch any dirt or debris that might be tracked in.

  • · Finally, step back and admire your handiwork! A new closet can really transform a space and make getting ready each day much easier (and more enjoyable).

Step 11: Fill Up the Closet

Assuming you have decided on the size and style of your new closet, it is time to fill it up! Here are a few tips on how to make the most of your new closet space:

  • Start with a fresh palette. Begin by decluttering your old closet and getting rid of anything you no longer need or use. This will make it easier to see what you have to work with and give you a blank slate to start from.

  • Edit your clothing collection. Once you have decluttered, take a good look at what is left. Do you really need all of those clothes? If not, get rid of anything that is outdated, doesn't fit well, or you simply don't wear anymore. Keep only the items that make you feel confident and look great.

  • Make use of all available space. Closet rods are great for hanging shirts, blouses, skirts, and pants but don't forget about using the space underneath for shoes or storing off-season clothing items. Install some shelves on one side of the closet for additional storage options.

Step 12: Keep Floor Space Clear

Once you’ve hung your clothes and shelves, it’s important to keep the floor space in your closet clear. This will help you avoid tripping over things and make it easier to clean. If possible, try to keep a path clear from the door to the back of the closet. You can also use storage baskets or bins to store items on the floor.


How much does it cost to install a new closet?

The average cost to install a new closet is $300 to $500. However, the cost can vary depending on the size and complexity of the project. For example, a simple reach-in closet can be as low as $200 to install, while a custom walk-in closet can be as high as $1,000 or more.

Labor costs will also play a role in the final cost of your project. If you hire a professional carpenter or handyman to install your new closet, you can expect to pay anywhere from $50 to $100 per hour.

How much do closet makeovers cost?

A typical closet makeover can cost anywhere from a few hundred to a few thousand dollars, depending on the size and scope of the project. For a small closet, you may only need to replace the doors and hardware, while a larger project may require new shelving, flooring, and lighting.

You can save money by doing some of the work yourself, but it's important to factor in the cost of materials and any necessary tools when budgeting for your closet makeover.

How much does a simple closet cost?

Assuming you are referring to a basic, stand-alone closet (as opposed to a built-in closet), the cost will depend on the materials you use and whether or not you hire someone to build it for you.

If you opt for cheaper materials like laminate or melamine and build the closet yourself, you could spend as little as $200. However, if you use more expensive materials like wood veneer or solid wood, and hire a professional to build the closet for you, the cost could be closer to $1,000.

Does IKEA do closet installation?

IKEA does not currently offer professional closet installation services, but that doesn't mean you can't install your own IKEA closet! With a little planning and some basic handyman skills, you can easily install your own IKEA closet system.

How long does closet installation take?

Depending on the size and complexity of your closet, installation can take anywhere from a few hours to a full day. If you're doing it yourself, be sure to allow for plenty of time to complete the project so you don't have to rush through it.

How to install built-in closet shelves?

Assuming you already have your closet framing in place, installing built-in shelves is a relatively easy process. Here are the steps you need to take:

  1. Cut your shelving material to size. You'll need to measure the width and height of your closet space and then cut your shelving material accordingly.

  2. Install supports for your shelves. The type of support you'll need will depend on the weight of your shelves and what they're made of. For example, if you're using heavy-duty shelves, you may need to install brackets or supports into the studs in your walls.

  3. Attach your shelves to the supports. Again, the method you use will depend on the type of shelf and support you're using. Brackets can be screwed or nailed into place, while supports can be glued or attached with screws or nails.

  4. Add any finishing touches, such as trim or paint, if desired.

With these simple steps, you can easily install built-in shelves in your closet!

How to install a closet bar?

Assuming you have already hung your closet rods:

  1. Measure the distance between the two uprights on the back wall of your closet. This is where you will be installing your closet bar.

  2. Cut a piece of wood to this measurement, making sure to allow for an extra inch or two on each end. This will be your new closet bar.

  3. Position the board on the back wall of your closet so that it is level and secure it in place with screws or nails.

  4. Hang your clothes on the new closet bar and enjoy your increased storage space!

How install closet rod brackets?

Most closet rods will come with their own set of brackets, but if not, they can be purchased separately at any hardware store. Using a stud finder, locate the studs in the wall where the brackets will be attached. When you find the studs, make a pencil note over them so you know where to start drilling.

Next, use a drill to create pilot holes at your marked locations. These pilot holes will make it easier to insert the screws that will hold your bracket in place. Finally, insert the screws into the pilot holes and tighten them until the bracket is secure.

Repeat this process for each bracket until your entire closet rod is installed.

How do you install sliding closet doors?

Installing sliding closet doors is a relatively easy process that can be completed in a few hours with basic tools. The first step is to measure the opening of the closet to ensure that the doors will fit properly. Next, mark the top and bottom of the opening where the doors will be installed.

Next, install the track for the bottom door by attaching it to the bottom of the opening with screws. Then, do the same for the top track. Once both tracks are in place, you can then install the doors themselves. Start with the bottom door, then add the top door. Make sure that both doors are level before securing them in place with screws.

Once the doors are installed, you can then add any hardware you desire such as handles or knobs.

How do you install a safe in a closet?

Here’s how:

  1. Choose the right location for your safe. It is important to choose a location that is out of sight and out of reach of children. A good location for a safe would be at the back of a closet on a high shelf.

  2. Mark the outline of the safe on the wall with a pencil so that you know where to cut the hole for it.

  3. Cut out the hole for the safe using a power drill with a large bit attachment.

  4. Affix the safe to the wall using heavy-duty screws or lag bolts. Be sure to use screws or bolts that are long enough to go through both the drywall and into a stud behind it so that the safe is securely anchored into place.

  5. Test the handle on the door of the safe to make sure it opens and closes smoothly. If it does not, then adjust accordingly until it does.

  6. Finally, fill up your new safe with whatever valuables you wish to keep locked away!

How do you adjust the height of a sliding closet door?

If your closet doors are too high or too low, you can adjust them by loosening the screws that hold the door track to the header plate. You'll need a screwdriver for this. Then, raise or lower the door track until the doors are at the desired height. Tighten the screws to secure the track in place.

Final Thoughts

After taking on a new closet installation project, it's important to take some time to finalize the details. By following these simple steps, you can be sure that your new closet is installed properly and ready to use.

10 views0 comments
bottom of page